Power on – The Status light will turn Green for 3 seconds, then turn off.
Pairing Mode – The Status light will alternatively flash Green & Red until paired: or will go off after 1 minute if pairing has failed. Pairing must be initiated (by pressing the connect button on the handset) within 1 minute of plugging the USB receiver into your system.
Pairing Success – The Status light will flash 3 times, then turn off when pairing is successful.
Low Battery – Low battery warning will be indicated by slow Red flash every 3 seconds, until the power is drained out or the power turned off.
Laser On / Warning – While the laser button is pressed and the laser is on, the Status light will light up Green.
Gyro Calibration – The Status light will alternatively flash Green & Red for 5 seconds to indicate that the Gyro is in need of calibration.